5mm x 19mm x 6mm SKF 635-skf Ball Bearings Miniatures

Series:HH228300; da - Cone Frontface Backing Diameter:148.08 mm; e - ISO Factor8:0.32; a - Effective Center Location3:-23.4 mm; Bearing Weight:17.9 Kg; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:29200 lbf; Ab - Cage-Cone Frontface Clearance:1.3 mm; Db - Cup Backface Backing Diameter:223.

Bolt Size:4 x M30; Dimension V:0.1 in; Dimension T:26.0 in; Support Type:Round Flange; Note:This product line wa; Dimension L:8.9 in; Dimension R:23.0 in; Cr - Dynamic Load Rating:190638 lbf; Seal Type:Felt Seal; Dimension P:1.5 in;

Y - ISO Factor9:2.19; a - Effective Center Location3:-0.34 in; Da - Cup Frontface Backing Diameter:2.62 in; D:2.7500 in; Cage Type:Stamped Steel; d:1.1250 in; Design Units:Imperial; e - ISO Factor8:0.27; db - Cone Backface Backing Diameter:1.54 in; C1 - Dynamic Radial Rating (1 million revolutions)5

N:M8; Dz:46 mm; B:22 mm; S:6 mm; Recommended tightening torque for set screw:3.2 Nm; A:30 mm; Z:44.5 mm; L1:17.5 mm; H2:57 mm; T max.:200 °C;

da min:13 mm; f0:12.4; Mass:0.02 kg; Nlim (oil):35,000 rpm; Da max:22 mm; Radial clearance class:CN; Min operating temperature, Tmin:-20 °C; rs min:0.6 mm; Max operating temperature, Tmax:120 °C; ra max:0.6 mm;

A2:45.4 mm; L:92 mm; C0:15.2 kN; d:36.51 mm; A1:12.5 mm; S:17.5 mm; Dz:80 mm; s1:21.45 mm; Designation of closed end cover:SCC207; e:20 mm;

Dynamic Load Rating C11:15880 kN; Lubrication Groove g:18.0 mm; Width B:400.000 mm; Static Load Rating Co:8780 kN; Chamfer rsmin:3.00 mm; Type:RX-1; Inner-Ring Set:460ARXS2371; Width C:400.000 mm; Weight:1167.100 lb; Backing Shaft Diameter ds:508.4 mm;

d:8 mm; Radial clearance class:CN; Brand:NTN; rs min:0.3 mm; f0:12.5; ra max:0.3 mm; B:7 mm; Nlim (grease):32,000 rpm; da min:10 mm; Max operating temperature, Tmax:120 °C;

s1:32.3 mm; Limiting speed:1100 r/min; A5:22 mm; A1:13 mm; Basic static load rating C0:15.3 kN; A:34.5 mm; Housing material:Cast iron; Basic dynamic load rating C:25.5 kN; Thread grub screw G2:3/8-24 UNF; Recommended diameter for attachment bolts, inch G:0.5 in;

Designation of housing:FLE204N-; N:11,5mm; Designation of bearing:EX203G2T20; C:12.8 kN; A:30.3 mm; Weight:0.59 kg; d1:32.4 mm; A1:10 mm; B1:43.5 mm; L:61 mm;

A:41 mm; G:R1/8"; s1:25.8 mm; J:157 mm; Recommended tightening torque for set screw:16.8 Nm; Designation of housing:FLZ210-; L:116 mm; N:14mm; A4:37 mm; e:24 mm;

db - Cone Backface Backing Diameter:8.11 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:88900 lbf; K - Factor8:1.46; Cone Part Number:EE780694; R - Cone Backface To Clear Radius3:0.190 in; G1 - Heat Generation Factor (Roller-Raceway):646.5; B - Cone Width:2.3750 in; C90 - Dyna

H1:76 mm; d:19.05 mm; T min.:-40 °C; G:M6x1; H:89 mm; B:31 mm; H2:51 mm; A1:12 mm; Weight:0.8 kg; A2:21 mm;

R - Inner Ring To Clear Radius1:2.500 mm; C0 - Static Radial Rating:2290000 N; B - Outer Ring Width:112.000 mm; Cage Type:EMB; e - ISO Factor3:0.31; Reference Thermal Speed Rating (Oil)7:1400; C1(2) - Dynamic Radial Rating (Two-Rows):1660000 N; Da - Outer Ring Backing Diameter:308.000 mm; Y2 - ISO F

R - Inner Ring To Clear Radius2:1.0 mm; d:85 mm; Da - Outer Ring Backing Diameter:112.700 mm; Ce - Dynamic Radial Rating1:38700 N; D:120 mm; Cage Type:CR - Phenolic Outer; do - Ball Diameter:9.525 mm; Limiting Speed (Grease):10800 rpm; Contact Angle:15 º; da - Inner Ring Backing Diameter:92.800 mm;